Floor N’ Wall Thin Set Mortar
Data Sheet 317aus.0
Data sheets are subject to change without notice LDS317aus.0 051205
1. PRODUCT NAME
LATICRETE® 317 Floor N’ Wall Thin Set Mortar
2. MANUFACTURER
LATICRETE Pty Ltd
464 Geelong Road,
Footscray West. VIC. 3012.
Telephone: 03 99336111
Toll Free: 1800331012
FAX: 03 99336199
Email: laticreteoz@laticrete.com.au
Internet: www.laticrete.com
3. PRODUCT DESCRIPTION
LATICRETE 317 Floor N’ Wall Thin Set Mortar is a bagged
cementitious powder to be mixed with either water or latex
admixtures for installing ceramic tile and natural stone using
the thin-set method of installation.
Must fortify with LATICRETE 333 Super Flexible Additive or
LATICRETE Latabond Mortar Admix for exterior use,
impervious tiles, porcelain, mosaic, glass and stone tiles, and
heavy traffic areas.
Uses
Designed for floors and walls, interior and exterior
applications.
Advantages
- Excellent non-sag formula for wall applications
- Smooth, easy to trowel formula
- Dual purpose, for walls and floors
Suitable Substrates
- Concrete  Cement Mortar Beds
- Ceramic Tile and
Stones***
- Cement Backer
Board****
- Exterior Grade
Plywood**
- Gypsum Wallboard*
- Concrete Masonry  Cement Plaster
- Brick Masonry  Cement Terrazzo
*Interior Use Only
**When mixed with LATICRETE 333 Super Flexible Additive. Interior use only.
***When mixed with LATICRETE Latabond Mortar Admix.
****Consult cement backer board manufacturer for specific installation
recommendations and to verify acceptability for exterior use.
Packaging
20 kg bags, 56 bags per pallet
Colors: off white and white.

Full  Technical Data Sheet at:

Download a MSDS

Download a Datasheet

NZ agents for Laticrete Adhesive
Mobile ceramics NZ
198 Moore Street, Howick 2014,
Auckland
New Zealand
09-535 1672