LATICRETE® 253
Multipurpose Thin-Set Mortar
Data Sheet 296aus.0
Data sheets are subject to change without notice LDS296aus.0 051205
1. PRODUCT NAME
LATICRETE® 253 Multipurpose Thin-Set Mortar
2. MANUFACTURER
LATICRETE Pty Ltd.
464 Geelong Road,
Footscray West. VIC. 3012.
Telephone: 03 99336111
Toll Free: 1800331012
FAX: 03 99336199
Internet: www.laticrete.com
3. PRODUCT DESCRIPTION
LATICRETE 253 Multipurpose Thin-Set Mortar is an
economical polymer modified, bagged, cementitious thinset
powder to be mixed only with water using the thin-set
method of installation.
Uses
Designed for interior and exterior floor and wall
installations of all types of ceramic tiles and natural
stones over concrete, plywood and a variety of
substrates.
Advantages
-Interior and Exterior
-Exceeds ANSI A118.4 Shear Bond Strength
Requirements
-Bonds to most surfaces
Suitable Substrates
- Concrete , Concrete Masonry
- Cement Mortar Beds , Cement Plaster
-Ceramic Tile and Stone , Brick Masonry
- Cement Backer Board**, Cement Terrazzo
- Exterior Grade
Plywood*
- Properly Prepared Vinyl
Tile and Other
Resilients
- Gypsum Wallboard*
*Interior use only
**Consult cement backer board manufacturer for specific installation
recommendations and to verify acceptability for exterior use.
Packaging
20kg bags
56 bags per pallet.

Full  Technical Data Sheet at:

Download a MSDS

Download a Datasheet

NZ agents for Laticrete Adhesive
Mobile ceramics NZ
198 Moore Street, Howick 2014,
Auckland
New Zealand
09-535 1672