style1 style2 style3

Construction Chemicals tile adhesives


Trademastic-PREMIXED NON-SLIP FLEXIBLE ACRYLIC ADHESIVE CONSTRUCTION CHEMICALS

By  Last updated: 4th September 2010

Trademastic-PREMIXED NON-SLIP FLEXIBLE ACRYLIC ADHESIVE-
CONSTRUCTION CHEMICALS

DESCRIPTION
Trademastic is a white premixed thin bed acrylic based ceramic tile adhesive with non-slip properties.
USES
Fixing ceramic and mosaic tiles to clean and firm walls of plaster, gypsum building board, cement sheeting,
cement render, bathrooms, laundries shower alcoves.
FEATURES
• Non-slip
• Flexible
• Easy application
COVERAGE (Approximate)
1 m2/litre (1.5kg)
PERFORMANCE DATA
Exceeds the performance requirements of AS2358 and BS5980
Shear Bond Strength (2.85Mpa)
SPECIFICATION
The ceramic tile adhesive shall be a premixed flexible acrylic adhesive that exceeds the requirements of AS2358
and BS5980 and has a minimum shear bond strength of 2.85Mpa such as Trademastic manufactured by
Construction Chemicals and shall be applied in accordance with the manufacturers application instruction.
SURFACE PREPARATION
Surfaces must be free from dirt, dust, grease, and other contaminants. Building boards must be firmly fixed at 450
mm centres to restrain movement with rough side out where possible. Remove paint and prime highly absorbent
surfaces (i.e. cement sheeting) with Primer & Grout Additive and allow to dry before application of adhesive.
APPLICATION
Apply the Trademastic with a 6mm x 6mm notched trowel. Spread only 1 m2 at a time as the adhesive dries rapidly.
Immediately press dry tiles into the ribs of adhesive ensuring that all of the tile is in contact with the adhesive before
it dries. Remove any excess adhesive from the surface of the tile before it dries using a damp cloth.The adhesive bed
should not be less than 1.6mm or greater than 3.5mm thick.DO NOT USE between two non-porous surfaces as
the adhesive will not set. Not suitable for immersed applications. Construction Chemicals provide other systems.
CAUTION
Do not use the adhesive between two impervious surfaces as the adhesive will not set.
Do not use in permanently immersed / ponded situation.
GROUTING
Allow adhesive to set for 24 hours before grouting with Kemgrout Flexible.
SHELF LIFE 2 years.

Full  Technical Data Sheet at: http://www.constructionchemicals.com.au

Related articles





TileShop DOMAINNAMERZ CanadaTiles TileAustralia Tiler1 TilerAustralia 0800TILESCOM 0800tilesNZ Tiling TilesAmerica TilesNewYork 0800tilesUK LATiles Tiler
Ducati848 DDUCATI YAMAHAR6 TILESTORE HondaCBR BathroomDesign OpeninghoursWS TilesChicago WDPage NZVisitMe 027Directory SeeInsideWs
700JetSki 900 bikes Boats LovechToday Melbournetileshops ClosingNet Lovech V12 Fishoogle YourLove 359BG Rabotno 52 News AustraliaCarpet Ottyk
KawasakiNinja 0800tiler Ducati1198 Interiors ShopsSydney TileStore 1198 ChicagoTS TilesNZ StoreHours OpeningHours Adhesives Jet-Ski
TShops Grout CCCodes TSydney OPENINGHOURZ TSAustralia ClosimgZ OpeningEU tileshopsbiz closingUK iClosing NYTShops Tadhesives
LondonTS TorontoTS Brisbane ChicagoTS LSstores iOpening TilerNZ HOUSTONTS SydneyS LondonUK TadhesiveNZ AtilerNZ BBathrooms
NEWZEALANDVISIT HoursNZ iopeningUK JetSki LovechD UKTS TLDN4 TstoresINFO EuroexINFO TILESHOPZ SEEINSIDER TadhesivesUK