CEMIX™ TILE BOND
A MODIFIED CEMENT BASED WATER RESISTANT
ADHESIVE FOR INTERIOR OR EXTERIOR FIXING OF
CERAMIC TILES AND MOSAICS ON FLOORS AND WALLS
DESCRIPTION:
CEMIX TILE BOND can be used on new concrete, old concrete, cement plaster and brick and block work.
It also can be used for spot bonding of insulation materials such as polystyrene. When using ceramic tiles of
low water absorption such as fully vitrified, monocottura or quarry tiles, natural stone, marble and slate,
mix CEMIX TILE BOND with CEMIX TILE BOND LATEX. CEMIX TILE BOND LATEX should also be used on more
difficult surfaces including those subject to continual dampness, wooden floors, particle board, gib board
walls, old tile floors, vinyl asbestos flooring, asphalt tiles, linoleum etc. Refer to CEMIX TILE BOND LATEX
specificaton sheet for further details.

Technical Data Sheet

http://www.ralenti.co.nz/cemix_datasheets/9_1_CEMIX_TILE_BOND.pdf

Cemix Limited
Cemix products are readily available from major building merchants throughout NZ
Phone:+64 (9) 636 1000

Email:  info@cemix.co.nz

Fax:+64 (9) 636 0000

Web Site: www.cemix.co.nz

Address:

15 Alfred Street,
Onehunga, Auckland,
New Zealand